中国·永利y23455(股份)有限公司

-Our most popular product among arborists

- Detects the size and location of decayed or hollow regions

- Works fast: a measurement can be completed in 5-10 minutes

 -Creates a 3D model of the trunk with multiple layers of measurement

- Customizable wind load modeling is included in the software

- Utilizes non-destructive technique using sound waves (no radiation)

- For trees with thick bark, 12 cm long nails are also available

1. Drive the transducers through the bark using a     rubber hammer with even spacing around the trunk.

2. Measure the distances between the transducers with a     caliper and enter the measured data to the computer.

3. Tap each transducer with a steel hammer to generate     sound waves. ArborSonic 3D measures the travel times with microsecond     precision to each transducer and transmits the data to the computer.

4. The software calculates and displays the internal     sound-velocity distribution of the tree.

5. Measurements taken at various heights can be     assembled into a 3D model.